Tutoriel Studio One 7 pour débutants : Guide complet de la DAW de PreSonus

Qu'est-ce que Studio One 7 — et le rebranding Fender

PreSonus Studio One Pro 7 est sorti le 9 octobre 2024 comme l'une des mises à jour les plus significatives du DAW depuis des années.^[1] Il a introduit un lanceur de clips intégré, un arpégiateur, un séparateur de stems IA, un séquenceur d'accords, et une refonte complète de la détection de tempo.

Si vous avez cherché « Studio One 7 » récemment et êtes arrivé sur une page Fender, ce n'est pas une erreur. Le 13 janvier 2026, Fender a renommé Studio One Pro en Fender Studio Pro.^[2] Le DAW reste le même logiciel — la marque et le nom ont changé, pas le code.

Pour les débutants en 2026, cela signifie : tout ce que vous apprenez sur l'interface et le workflow de Studio One 7 s'applique directement à Fender Studio Pro 8. La vue d'arrangement, le mixer Console, le navigateur, le lanceur, et les raccourcis clavier sont identiques.

Versions et tarifs

Studio One 7 a consolidé la gamme en une seule édition Pro. Il n'y a pas de niveau gratuit — l'essai gratuit de 30 jours est le point d'entrée, sans carte de crédit requise.^[3]

Pricing shown reflects Fender Studio Pro 8 current rates as of January 2026.^[3] For beginners on a budget, the monthly plan at $19.99 lets you run a professional session without a large upfront commitment. The perpetual license is the better long-term value if you plan to use the DAW for more than 10 months.

L'interface : page d'accueil, page Song et navigateur

Studio One 7 s'ouvre sur la page d'accueil — un hub où vous créez ou chargez des sessions, accédez aux fichiers récents, et configurez votre périphérique audio. Avant d'ouvririr un morceau, confirmez que votre interface est détectée dans le menu Audio Setup en haut à droite.

• Start Page Créer un nouveau morceau, créer un nouveau projet (pour masteriser des albums multi-morceaux), ou ouvrir un fichier récent. Épinglez les sessions importantes avec l'icône Épingle pour les garder visibles dans la liste des fichiers récents.
• Song Page L'environnement de production principal. Contient la vue d'arrangement (en haut, votre timeline de pistes), la Console (en bas ou flottante, votre mixer), l'Inspecteur (à gauche, les paramètres de piste), et le Lanceur (à gauche, la grille de clips pour la production non linéaire).
• Navigateur Quatre onglets : Fichiers (audio local), Instruments (synthés virtuels), Effets (plugins), et Boucles. Tout est glisser-déposable directement sur la timeline ou la Console. Le système de tags vous permet de filtrer par catégorie, humeur, et tempo.
• Launcher (New in v7) Une grille horizontale pour la production non linéaire basée sur les boucles. Vit dans la page Song, à gauche de la timeline. Les clips audio et MIDI résident dans des cellules ; déclenchez-les individuellement ou lancez des lignes entières (« scènes ») pour des performances en direct ou des arrangements rapides.
• Console Appuyez sur F3 pour basculer le mixer. Chaque piste a sa propre chaîne de canaux avec un fader de volume, un bouton de panoramique, une chaîne d'effets d'insertion, et des emplacements d'envoi. Les canaux de bus et le bus master se trouvent à droite.

Types de pistes expliqués

Comprendre quel type de piste utiliser vous évite des maux de tête de réacheminement plus tard. Studio One 7 utilise quatre types de pistes principaux.^[5]

Un avantage de Studio One à connaître tôt : une piste d'instrument contient à la fois le MIDI et la sortie audio du plugin dans une seule piste.^[5] Cela signifie que vous n'avez pas besoin de créer une piste MIDI et une piste audio séparées et de les router manuellement — Studio One gère la chaîne signal automatiquement.

Créez votre première chanson : pas à pas

Le guide suivant vous amène d'une session vide à un rough mix terminé en une seule séance. Chaque étape est autonome — vous pouvez vous arrêter après n'importe laquelle et avoir un projet fonctionnel.

1. Create a new song
   From the Start Page click Create New Song. Choose a template or start from blank. Set your Tempo (90–100 BPM is versatile for most genres), Sample Rate (44.1 kHz is standard; use 48 kHz if your project will sync to video), and Resolution (24-bit). Click OK. The Song Page opens.
2. Add a drum track with Impact XT
   Open the Browser (F5), click the Instruments tab, expand PreSonus, and find Impact XT. Drag it to an empty area in the Arrange view — Studio One automatically creates an Instrument track. Double-click the track to open Impact's pad grid. Drag one-shot samples from the Browser's Files tab onto pads, or use a factory kit. Press N to open the Note Editor (piano roll) and draw a basic 4/4 kick-snare pattern on the two-bar loop marker.
3. Program a bass or chord part
   Drag Presence XT (the built-in sampler) or any installed synth plugin onto a new track. Select a bass preset in the Instruments browser. Press N again (for the new track) to open the Note Editor and draw or record your bass notes. If you have a MIDI keyboard, arm the track and play — Studio One records whatever you play. Use Punch In (I) to re-record just a bad bar without affecting the rest.
4. Experiment with loops in the Launcher
   Press the Launcher icon (grid symbol, top-left of the Arrange view) to open the Launcher panel. Drag audio loops from the Browser into Launcher cells. Click a cell to trigger it; adjust loop tempo-sync in the cell settings. When a combination sounds good, right-click the row header and choose Capture to Timeline to drop those clips into the arrangement at the playhead position.
5. Record vocals or live audio
   Add an Audio track (Track > Add Tracks, choose Audio). Select your audio interface input from the track's Input dropdown. Enable the Record Enable button (red circle) on the track, enable the Monitor button (speaker icon) to hear yourself through the mix. Press Numpad 0 to arm the transport, then Numpad Enter to record. Studio One creates a new audio event (clip) on each take — nothing is destructive.
6. Basic mixing in the Console
   Press F3 to open the Console. Set rough levels: kick around -10 dBFS, snare around -12 dBFS, bass around -10 dBFS, everything else underneath those anchors. Add the built-in Channel Strip to your vocal track by dragging it from the Effects browser. Dial in a gentle high-pass filter below 80 Hz and a touch of compression (4:1 ratio, medium attack). Use Bus tracks to group your drums, then compress the bus lightly for glue.
7. Export your mix
   Go to Song > Export Mixdown. Choose WAV / 24-bit / 44.1 kHz for mastering-ready output, or MP3 / 320 kbps for sharing. Enable Between Loop to export only the region you have marked. Click OK — Studio One renders and saves the file.

Fonctionnalités signature de Studio One 7 à connaître

Beyond the basics, Studio One 7 has several capabilities that differentiate it from other DAWs at a similar price point. These are the ones that come up most often in beginner questions.

Drag-and-Drop Everything

Studio One was built around a 'drag it anywhere' philosophy.^[7] Drag a plugin from the Browser onto a track to insert it. Drag a loop from the Browser onto the timeline to place it. Drag audio from the Launcher into the arrangement. Drag a preset from the Console to another channel to copy its effects chain. You rarely need to open a sub-menu — if something can logically go somewhere, dropping it there usually works.

Integrated Launcher (Clip Launching)

The Launcher introduced in Studio One 7 provides a grid-based clip workflow similar to Ableton Live's Session View, but integrated directly into the standard arrangement window so you can see both simultaneously.^[8] Cells hold audio or MIDI clips. You can group rows into 'scenes' and sequence scenes into a playlist — essentially a non-linear arrangement mode for live performance or sketching ideas before committing to a timeline.

AI Stem Separation

Right-click any audio clip in the Arrange view and go to Audio > Separate Stems. Studio One 7 uses an AI model to split the file into up to four components: vocals, drums, bass, and other instruments.^[9] The original clip is muted and a folder of separated stems appears in place. Sound On Sound notes that 'results show remarkable technology but include occasional artifacts and reverb tail remnants' — practical for remixing and sampling, less reliable as a forensic tool.^[2]

Global Transpose and Advanced Tempo Detection

Change the key of your entire project in one click via Song > Song Key. Studio One updates all Instrument track notes and audio clips (using time-stretching/pitch-shifting) simultaneously.^[1] For producers who import found audio at an unknown tempo, the Advanced Tempo Detection feature analyses the audio event and generates a tempo map automatically, so your grid snaps to the performance rather than forcing the performance to snap to your grid.

Splice Integration

Studio One 7 is described by Splice as 'the first and only DAW with Splice integration.'^[9] A built-in Splice browser lets you search by sound: drop audio onto the search field and the tool finds samples that match your project's current key and tempo. Free users get access to a curated selection of samples; a full Splice subscription ($12.99/month at the time of v7's launch) unlocks the full catalogue.^[2]

Studio One 7 vs autres DAW pour débutants

If you are deciding between Studio One and the other popular options, this table covers the most relevant differences for someone just starting out.

Studio One's competitive edge for beginners is its combination of a clean timeline-first workflow with the Launcher bolted on — you do not have to choose between linear and clip-based production the way you do in Ableton, where Session View and Arrangement View are separate modes. If you already know you want to record live instruments and produce beats in the same session, Studio One handles both without making you switch mental contexts.

Conseils pratiques pour votre première semaine

• Use Smart Templates When creating a new song, browse the Styles or Interfaces template lists. A template pre-configures tracks, bus routing, and channel strips for a specific genre or workflow. Starting from 'Hip-Hop Beat' or 'Singer-Songwriter' saves 20–30 minutes of routing setup.
• Learn the five must-know shortcuts F5 toggles the Browser, F3 toggles the Console, N opens the Note Editor for the selected clip, G toggles the grid snap, and Numpad Enter starts recording. Everything else can wait.
• Keep your buffer size in check High buffer (512–1024 samples) = low CPU load, but noticeable latency when playing or singing along. Low buffer (64–128 samples) = low latency, but heavier CPU load. Start at 256. Freeze CPU-heavy Instrument tracks (right-click track > Transform to Audio Track) once a part is recorded to free up headroom.
• Use the Scratch Pad Studio One has a Scratch Pad (small notepad icon in the Arrange toolbar). It is a separate mini-timeline inside your project where you can test arrangements or try out an alternate chorus without touching your main session. Drag sections from the Scratch Pad to your main timeline when you like them.
• Save often with Save New Version Use Song > Save New Version (Ctrl/Cmd+Alt+S) instead of plain Save when you are about to try something risky. Studio One appends a version number and keeps both files, so you can roll back without hunting through an Undo history.